半透明FEP 氟塑料颗粒 FEP 美国杜邦 106 模压成型 fep注塑原料 挤出加工
For inventorycontrol purposes product name may be followed by an X.
Products labeledFEP 106 and FEP 106 X are e and all information in thisdocument is applicable to both.
TypicalApplication
Small diameter,thin wall wire and cable insulations. Intricate or thin wall partsmade by injection moulding.
DuPont Teflon®FEP 106 is a melt-processible copolymer of tetrafluoroethylene andhexafluoropropylene without additives that meets the re ASTM D 2116 type II.
It offers theexcellent combination of properties characteristic of Teflon®fluoropolymer resins: non-ageing characteristics, chemicalinertness, exceptional dielectric properties, heat resistance,toughness and flexibility, low coefficient of friction, non-stickcharacteristics, negligible moisture absorption, low flammability,performance at temperature extremes and excellent weatherresistance.
Teflon® FEP 106is a "high productivity" grade of Teflon® FEP. It is designed forthe extrusion of thin wall, small diameter wire insulations. It canalso be used for injection moulding of intricate and thin wallparts.
At processingtemperatures it shows low viscosity and a high critical shear rate.In similar wire constructions it can be extruded at higherextrusion line speeds than the general purpose grade Teflon® FEP100.
Stress-crackresistance is an important element in establishing end-useperformance. Experience shows that the MIT folding endurance orflex life test, performed on a thin film of resin, has establisheda good correlation with extensive cable testing. The higher the MITflex life, the higher the stress-crack resistance of the resin. MITtest results should be viewed as a guide to comparative performanceof the various grades of resin. We recommend that for applicationsinvolving repeated thermal and flex cycling, specific tests on thefinal cable always should be undertaken. See also DuPont's bulletin"Grade selector for Wire and Cable applications".